New Powerful PIR Detector

Key Specifications/Special Features:

• Features:
  • Selectable 1.2 or 3 pulse count eliminates false alarms due to environmental disturbances
  • High immunity to visible light
  • Walk-test LED simplifies testing and is easily disabled after installation
  • Built-in tamper switch
  • Small size and neutral shade blends nicely with most decor
  • Superior EMI and RFI immunity
  • Adjustable detection pattern can be mounted between 1.5 (4 feet 10 inches) to 4.1meters (13 feet 6 inches)
  • Corner and wall mountable, OMNI-SWIVEL mount bracket included (for wall and ceiling)
  • State-of-the-art quality control and computerized testing of each unit separately
• Electrical:
  • Voltage range: 9-16VDC
  • Quiescent current: 16mA typical at 12VDC
  • Tamper output: normally closed voltage free switch contacts. Rated at 24VDC 50mA
  • Walk test LED: internal link to enable/disable
  • Alarm output: normally closed (fail safe) voltage free relay contacts. Rated at 24VDC 50mA protected by 18Ω series resistor
  • Alarm period: 2 to 3 seconds typical
  • Pyro-electric detector: dual element, low noise
• False alarm protection:
  • Pulse count: internal link to select 1, 2 or 3
  • RF immunity:
    Minimum: 12V/M superior to CE standard
  • Transient immunity: no false alarm up to 4kV
  • Electrostatic discharge: no false alarm up to 8kV
  • Noise: noise reduction circuits with maximum ground plate
  Environmental:
  • Humidity: 95% non-condensing
  • Operating temperature: -10 to 55 deg. C (14 to 131 deg. F)